Eizo RadiForce LS560W

56.2″ Quad Full HD 3840 x 2160 8-bit LCD Monitor

Eizo RadiForce LS560W - 56" Quad Full HD LCD Monitor





This product has been discontinued by the manufacturer.

56-inch Quad Full High Definition (QFHD) features the resolution of 8.29 megapixels which is equal to that of four full HD monitors. It enables a new dimension in medical imaging, allowing high flexibility in arranging different screen layouts. No panel color differences and no obtrusive bezels requires less eye movement and less potential for distraction as compared with multi-monitor use.

  • Redundant power supplies for backlight and monitor electronics.
  • DICOM/CIE compliant grayscale response built into the monitor.
  • Integrated uniformity correction for homogeneous luminance.
  • 5 user defined 11-bit look-up tables adaptable to diverse reading and viewing environments.
  • Gamma response calibrated during manufacturing to provide consistent image quality from one monitor to the next.


Eizo - Single screen replaces many
Everything in a Single Glance
The monitor can support 10-bit input for each RGB color, displaying more than one billion colors simultaneously. This ensures accurate reproduction of color tones for 3D color rendering and image fusion.

Brightness Uniformity for a Steadier Image Across the ScreenEizo - Digital Uniformity Equalizer (DUE)

The Digital Uniformity Equalizer (DUE) function provides optimum backlight luminance uniformity which is considered difficult to attain due to the characteristics of LCD monitors, especially with larger screen sizes.

Diagnostic Precision with Factory Adjustment

To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tone on the production line to offer monitors fully compliant with DICOM Part 14.

Work Safely with Minimal Picture Delay

With images displayed on the screen in real time, time critical aspects of image distribution are addressed to ensure e.g. safe catheter localization during insertion into an artery.

Operational Reliability Through Redundant Components

With its redundant components architecture (2 power supplies, 2 backlights, 2 transmission links), EIZO ensures a high degree of operational reliability for fail-safe environments. A monitoring function can be configured to notify the X-ray system if e.g. operating conditions become critical or a component fails.

Arm Mountable VESA Compliance

VESA compliance to be attached to existing mounting accessories.

Wide Viewing Angles for Multiple People Use

Thanks to the wide viewing angles, images can be viewed simultaneously by several people with the highest quality reproduction and minimal color shift.

Quick Brightness Stabilization for Instant Viewing

EIZO’s fully automated stability function makes use of an internal backlight sensor to quickly stabilize the brightness level at startup and to compensate for fluctuations caused by variations in ambient temperature and the passage of time.

Consistency with DICOM Part 14 CalibrationDICOM Part 14 Calibration

RadiForce monitors are calibrated to comply with DICOM Part 14 to offer rendering consistency over time.

LCD Panel Protector for Easy Cleaning

The panel protector secures the screens from scratches, damages and liquids and alleviates cleaning and disinfection of the front surface.

Customer Assurance with Medical Standards

RadiForce monitors meet the strictest medical, safety, and EMC emission standards.

Size 56.2″ / 143 cm (1.430 mm diagonal)
Native Resolution 3840 x 2160 (16:9 aspect)
Display Size (H x V) 1244.1 x 699.8 mm
Pixel Pitch 0.324 x 0.324 mm
Display Colours 16.77 million colours
Viewing Angles (H / V, typical) 176°, 176°
Brightness (typical) 450 cd/m2
Contrast Ratio (typical) 1200:1
Response Time (typical) 6.5 ms (Midtone)
Input Terminals DVI-D 24 pin x 2
Digital Scanning Frequency (H / V) 131.3 kHz, 59.7 ~ 60.3 Hz
USB Function n/a
USB Standard n/a
Power Requirements AC 100 ~ 120 V / 200 ~ 240 V, 50 / 60 Hz
Maximum Power Consumption 500 W
Power Save Mode Less than 41 W
Power Management PDVI DMPM
Sensor Backlight Sensor
Net Weight 49 kg
Net Weight (Without Stand) 49 kg
Hole Spacing (VESA Standard) 400 x 400 mm
Degree of Protection IP20
Certifications & Standards CE (Medical Device Directive), EN60601-1, UL60601-1, CSA C22.2 No. 601-1, FCC-A, RoHS, China RoHS, WEEE, CCC
Supplied Accessories AC power cord, dual link signal cables (DVI-D>DVI-D), Utility Disk (user’s manual)
Warranty Two Years